Isuzu 6.6 Liter Duramax Diesel Front & Rear Crankshaft Seal and Wear Sleeve Installer/Remover Alternative to J-44645 J-44642

Description

• This Rear Crankshaft Oil Seal and Wear Sleeve Installer J-44642 Alternative is used on ISUZU 6.6L Duramax 2001-Later GMT800, 2500HD, 3500 with 6.6 liter Duramax diesel engines
• The crankshaft rear seal is fitted to both the engine block and crankshaft.
• Fit of the inner and outer seal bodies is critical and any misalignment can result in leakage.
• Our tool is designed to install the seal to correct depth and alignment. Place the seal onto the end of the crankshaft. Screw the installer into the end of the crankshaft. Turn the forcing screw so the body of the tool can push on seal until it bottoms in the block.
• Front Crankshaft Seal and Wear Sleeve Installer
• J-44645 Alternative
• Applications ISUZU 6.6L Duramax 2001-Later GMT800 GMT800 3500 6.6 liter diesel engine
• Fit of the inner and outer seal bodies is critical and any misalignment can result in leakage. Place the seal onto the end of the crankshaft. Screw J-44645 into the end of the crankshaft. Turn the forcing screw so the body of the tool can push on seal until it bottoms in the block.
• J-44645 is designed to install the seal to correct depth and alignment.

Also Sold SeparatelyFEPRO4645 & FEPRO4642